Visit the Online Store

Buying just a few?
Check out our Online Store.

Our standard sized boxes are available in small quantities.

 
Shop Now

Band Saw Operator

Band Saw Operator

Apply Now

The Cutter in the Cutting Department is responsible for cutting mineral fiber with a band saw, based on specification sheets detailing quantities and sizes, to be used in the pad set manufacturing process.

 

Qualifications:

  • High school diploma or equivalent preferred, but not required.

  • One year experience in production or manufacturing facility preferred, but not required.

  • Some experience with a band saw in a production or manufacturing facility preferred, but not required.

 

Essential Job Functions:

  • Must have the ability to work physically onsite at R.N.C.

  • Must be able to lift 70 pounds (lbs.) alone several times a day to move bundled mineral fiber from pallets to the work area/table.

  • Must possess a positive attitude and contribute to a harmonious working environment.

  • Must have the ability to communicate effectively in English with peers, supervisors, and upper management to achieve the following results:

    • Adhere to company policies;
    • Provide job status updates regarding daily work activities;
    • Add value by offering solutions to problems; and
    • Accept and build upon constructive feedback from peers, supervisors, and upper management.
  • Must have the ability to read and prepare paperwork in English at R.N.C. to accomplish the following results:

    • Read and understand Cut Work Orders, Bundle Cut Sheets, and Cut Sheets and inspect them for accuracy.
    • Fill out the Bundle Cut Sheet as an order is being cut using “tally mark” notations (example: IIII);
    • Fill out the Cut Work Order with the correct information when cutting is complete; and
    • Log the sizes and pieces cut into the Production Book.
  • Must have the ability to visually conduct band saw inspections as follows:

    • Check the fence, band saw blade, and table for squareness with a framing square;
    • Verify accuracy of the measuring tape on the band saw table by comparing it to a hand-held calibrated tape measure;
    • Inspect frame, table legs, and table top for any cracked or broken parts;
    • Inspect the band saw blade for missing teeth and dullness;
    • Ensure the band saw equipment does not have any loose wires; and
    • Listen for any unusual noises when the band saw is powered on.
  • Must have the ability to work the following schedule, or as needed by the company:

    • A set four (4) day work-week, Monday through Thursday;
    • Overtime hours beyond the normal 7:00 AM to 6:00 PM work day and/or on holidays and weekends;
    • Adhere to break start and stop times;
    • Attend meetings on time; and
    • Attend all training sessions.
  • Must have the ability to adhere to, observe, follow, read, and understand the following safety rules and company policies:

    • Wear safety glasses when in the warehouse;
    • Maintain a clean work area;
    • Keep work area organized and free of stray pallets and other trip hazards;
    • Check to be sure all equipment and tools are in good condition;
    • Notify the manager of any electrical, mechanical, or human health concerns;
    • Report any safety concerns to the manager;
    • Adhere to customer requirements;
    • Follow policies in Employee Handbook; and
    • Adhere to appearance/dress codes.
  • Clean the kitchen and bathroom on the assigned days; and

  • Dump the trash every day.

This is not an exhaustive list of job responsibilities and duties. R.N.C. Industries, Inc. has the right to request that you perform other job duties in addition to those listed in this job description.